Cannot Determine Log Device To Use For Dev Usbms0
For example, to mount the file system on an x86 system, execute the following command: # mount -F pcfs /dev/dsk/c3t0d0p0:c /mnt To mount the file system on a SPARC system, execute Share Clone via HTTPS Clone with Git or checkout with SVN using the repository's web address. The next hot-plugged mouse becomes the console mouse. Overview of USB Devices Universal Serial Bus (USB) was developed by the PC industry to provide a low-cost solution for attaching peripheral devices, such as keyboards, mouse devices, and printers, to check over here
For example: # umount /mnt Remove the device. Verify that the audio device files have been created. % ls /dev/sound 0 0ctl 1 1ctl 2 2ctl Test the left and right USB speakers. % cd /usr/share/audio/samples/au % audioplay -d Unmount the device. The fact that their data is run through a USB port is transparent to the user.
The patch number for the USB dual framework found in the Solaris 8 HW 5/03 release is 109896. The device nodes are created under the /dev/rdsk directory for character devices and under the /dev/dsk directory for block devices. manually it ejects properly .i hav tried running cfgmgr also .while issuing comm.mount /dev/cd0 /cdromit gives me error likemount : 0506-322 Cannot determine log device to use for /dev/cd0 (/cdrom)and if how did you resolve this?
- No comments: Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest Labels: AIX Installation of the Virtual I/O Server directly from the HMC HMC firmware version 7.7.7 allows installation of the Virtual
- For more information on configuring removable storage devices, see rmmount.conf(4) or vold.conf(4).
- For more information on the CDE File Manager, see dtfile(1).
- Use powermt to determine which hdiskpower contains the hdisk in the boot list. 10.
- Eg: PATH=:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin Current directory first PATH=/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin: Current directory last PATH=/bin:/usr/bin:/usr/X11R6/bin::/usr/local/bin Current directory in middle With above you can execute the scripts directly from your current path without ./ .
- Examine your system's new audio links.
- For additional USB support information, see Overview of USB Devices.
- Events occurs on system before it is ready for use. 1.
For information on hot-plugging USB devices, see: Using USB Audio Devices (Task Map) Hot-Plugging USB Devices With the cfgadm Command (Task Map) (Optional) Identify the diskette device. The workaround is to power cycle the USB speakers. A USB 2.0 PCI card is needed to provide USB 2.0 ports. Newbies Corner Hardware Software Installation Window/Desktop Managers Kernels and Modules Networking Web/Security Mobile Computing Games Programming/Scripts Technical How I Did It!
Forum New Posts FAQ Calendar Forum Actions Mark Forums Read Quick Links Today's Posts View Site Leaders What's New? RE: problem mounting cdrom sys (MIS) 1 Apr 01 22:28 Hi Guys,Try with thismount /cdfsHave FunRavi Red Flag This Post Please let us know here why this post is inappropriate. The command also terminates any active applications that access the device. check that So i thought directly creating JFS2 on a disk rather than using LVM might be a better option.
While high-speed devices connected to these ports might work as such, use of such devices on these ports is not recommended. Powered by Blogger. The procedure changes the primary audio device to the onboard audio device as an example. The size of these files is specified as a parameter to the -O option and must be specified in megabytes.
Cancel Red Flag SubmittedThank you for helping keep Tek-Tips Forums free from inappropriate posts.The Tek-Tips staff will check this out and take appropriate action. This change has the following advantages: USB storage devices with standard MS-DOS or Windows (FAT) file systems are now supported. Type in the IP address, subnet mask and default gateway for VIOS. 6. The host controller contains the root hub, which is the origin of all USB ports in the system.
ref: http://publib.boulder.ibm.com/infocenter/pseries/v5r3/index.jsp?topic=/com.ibm.aix.cmds/doc/aixcmds3/mkramdisk.htm /sbin/helpers/jfs2/mkfs -V jfs2 -o log=INLINE /dev/hdisk# mkdir /mnt/hdisk# mount -V jfs2 -o log=/dev/hdisk# /dev/hdisk# /mnt/hdisk# Rgds Mark Taylor More... http://inviewsoftware.com/cannot-determine/cannot-determine-log-device-to-use-for.html USB 2.0 Devices Features and Compatibility Issues USB 2.0 devices are defined as high-speed devices that follow the USB 2.0 specification. Hot-Plugging USB Devices With the cfgadm Command (Task Map) Task Description For Instructions Display USB bus information Display information about USB devices and buses. No comments: Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest Labels: AIX KDB Commands on AIX. # echo vnode| kdb # echo "rqi" | kdb # echo "mrq *" | kdb
You can use the prtconf command's -D option to display additional driver information. USB connectors are designed to fit only one type of cable, one way. Reload to refresh your session. this content It sets sample frequency and precision, and encodes requests from the usb_ac driver.
USB Keyboards and Mouse Devices Only Sun USB keyboards and mouse devices are supported. Solaris Support for USB Devices The following table describes Solaris support for USB 1.1 and USB 2.0 devices: Solaris 8 HW* releases Solaris 9 releases Solaris 9 4/04 USB 1.1 Register now while it's still free!
Check the rootvg mirrored properly or not. # lsvg -l rootvg 2.
How to Display USB Bus Information (cfgadm) Unconfigure a USB device Logically unconfigure a USB device that is still physically connected to the system. Eg: perfpmrdata # mkdir /tmp/perfdata # cd /tmp/perfdata 5. The physical Ap_Id is the physical pathname of the attachment point. How to Mount or Unmount a USB Mass Storage Device Without vold Running See How to Prepare to Use USB Mass Storage Devices Without vold Running for information on disabling vold.
Execute perfpmr.sh from perfdata directory. USB Devices Systems Supported HID control on audio devices SPARC based and x86 based systems. Volume management makes the device available for access under the /rmdisk directory. have a peek at these guys Other applications, such as SunPCI and rmformat, will also succeed.
All USB devices are hot-pluggable. Verify that the primary audio device link is pointing to the onboard audio. # ls -lt /dev/audio* lrwxrwxrwx 1 root other 7 Jul 23 15:49 /dev/audio -> sound/0 lrwxrwxrwx 1 root try mount -o log=
You can move the console keyboard and mouse to another hub at any time after a system reboot. PCI card ports (4) fall under two hierarchical pci nodes 1 and 3 because they are driven through both the motherboard and the PCI card. A bus-powered hub does not have its own power supply. These devices might not work well on bus-powered hubs or might drain the hub of power for other devices.
The keyboard and the mouse share a common USB bus address because they are directed by the same USB controller. Terms Privacy Security Status Help You can't perform that action at this time. This is from the ramdisk man page .. update: Failed while executing the devices.chrp.base.rte.post_u script. 0503-464 installp: The installation has FAILED for the "root" part of the following filesets: devices.chrp.base.rte 126.96.36.199 Any idea how to resolve this error.
Note – You must include the /usr/dt/man directory in your MANPATH variable to display the man pages that are listed in this section. One or more child interface nodes represent the individual USB interfaces on the device. For up-to-date information on USB driver development, including information on the DDK, go to: http://developers.sun.com/solaris/developer/support/driver/usb.html The EHCI and OHCI Drivers Features of the EHCI driver include: Complies with enhanced host controller USB Host Controller and Root Hub A USB hub is responsible for the following: Monitoring the insertion or removal of a device on its ports Power-managing individual devices on its ports